HYPERFOR SLIDING GATES
- Built-in digital control unit
- Galvanized painted sheet steel cabinet
- Intensive operation even with large gates
- Obstacle detection
- Self-learning of opening and closing times
- Synchronized operation of two motors using the SYNCRO module
- Possibility to adjust the gear motor torque
- Industrial electromechanical limit switch and M6 pinion
230V VERSIONS WITH INVERTER
The Hyperfor sliding gate motor is a true powerhouse handling up to 4000kg with ease. Intensive operation is handled even with large gates and there is the possibility to adjust the gearmotor torque. It also boasts obstacle detection, built-in digital control unit and industrial electromechanical limit switch plus M6 pinion. The SYNCRO module allows the synchronized operation of two motors and self learning opening times. The 230v version has a three-phase motor with inverter and programmable acceleration and deceleration.
Motor for sliding gates up to 4000kg. Safety Obstacle detection. Industrial electromechanical limit switches. High usage factor. Gearbox oil bath protected. mechanical torque regulation.
- LCD Programming (Image)
- Assembly Position (Image)
ELECTRICAL WIRING
- Main power supply
- Flashing lamp
- Photocell
- Push button or key switch
- Antenna
TECHNICAL DATA
POWER SUPPLY (Vac/Hz) | 3 X 400 / 50 – 60 |
POWER CONSUMED (W) | 1100 |
ABSORBED CURRENT (A) | 2 |
CAPACITOR (UF) | |
MOTOR VOLTAGE (Vac / Hz) | 3 X 400 / 50 – 60 |
MAXIMUM TORQUE (N / m) | 216 |
MAXIMUM SPEED (m / min) | 10.8 |
LOCK | YES |
LIMIT SWITCHES | YES |
ENCODER | NO |
PINION | M6 – Z 15 |
DUTY CYCLE | S3 – 50 % |
PROTECTION LEVEL | IP 55 |
OPERATING TEMPERATURE (DEGREE C) | -20 /55 |
MOTOR WEIGHT (KG) | 35 |
MAXIMUM WEIGHT OF THE LEAF (KG) | 4000 |
There are no reviews yet.