Smart ID RFID Card Reader Long Range UHF Printable Blank 125 kHz

RF23 is a keypad and proximity standalone RFID Card Reader access control . Both methods of input can be used separately or in combination for extra security.

Its slim profile, RFID Card Reader modern aesthetics and durable construction make it fantastic and secure on any wall especially with its anti-tamper feature.

All programming can be done at the reader itself making installations quick and easy without the need for a PC. The device can be used as a standalone RFID Card Reader access control system simply by adding a 12V power supply and door release or it can be used to upgrade an existing system.


 Name Touch Screen Keypad Access Card Reader
 Frequency 125 kHz
 Interface Wiegand26 input, can connect external reader RFID Card Reader
 PIN length 3-6 digits
 Material ABS
 Size 117*75*20 mm
 Operating temperature 0 – 60°C
 Operating humidity 20% – 90%
 Verification Method Card / Password/ Card +Password
 Storage RFID capacity 1000 users (can be upgraded to 4000 users )

Factory default setting:

 Programming Password 123456
 Open Mode Card or Access PIN
 Output signal time 5secs
 Backlight Auto
 Security function Off
 WG26Port Input

RFID Card Reader access control system

Product Features
Product Name
125KHz White NFC Inkjet RFID Card Reader Smart ID Long Range UHF Printable Blank RFID Card With Chip
Material Type
Plastic, PVC, PET, Paper, Epoxy, Wood.
LF: 125 KHz; HF: 13.56 MHz; UHF: 860-960 MHz
ISO11784/5, ISO14443A, ISO15693, PC Class1 Gen 2, ISO18000-6B/C.
Chip Type
TK4100, EM Chip, F08, MF 1K/4K Chip, NFC213/215/216, H3, MR6, U7/8 or Customized.
Reading Distance 
LH: 1-20cm; HF: 1-10cm; UHF: 10-2000cm
85.5*54mm or customized.
Crafts Available
QR Code, Barcode, Magnetic Stripe, Signature Stripe, UV, Embossing, Encoding, etc.
Offset/Silkscreen/Digital Printing, etc.
Access Control, Attendance Management, Logistics, Asset Management, Identification.
RFID NFC Card RFID Card Reader


  • Two sets of signals are outputed independently , a set of relay signals and a set of PUSH signals
  • Can be connected with the exit button and doorbell
  • Full programming from the keypad ,easy to install and program
  • User capacity: 1000 users(can be upgraded to 4000 users )
  • Supports three way to access : Card, PIN, Card + PIN
  • Can be used as a standalone access controller
  • Wiegand 26 input for connection to external reader
  • Wiegand 26 output for connection to a controller
  • User-friendly and adaptable interface
  • Backlight keys
  • Easy of use to add and remove access
  • Very low power consumption (30mA)
  • Lock output current short circuit protection
  • Built in buzzer
  • Red and Green LEDS display the working status
  • Installation, training, and ongoing maintenance and support

Based on 0 reviews

0.0 overall

Be the first to review “Smart ID RFID Card Reader Long Range UHF Printable Blank 125 kHz”

There are no reviews yet.

Vendor Information

  • Store Name: MRM TECHNOLOGY
  • 3.03 rating from 688 reviews
Request a Estimate
Enter Your Information below and we will get back to you with an estimate within few hours