Electromagnetically linear 230Vac motor for swing gates up to 3m per leaf

  • Two sizes of piston rods (CA43:400mm,CA53: 500mm)
  • Great pushing force, 2300N
  • Protected power cable protection
  • Easy to install
  • Cost-effective
  • Safety. Obstacle detection
  • One model for both left hand and right hand

Motor for swing gates up to 3m per leaf Two sizes of piston rods (stroke 400mm, 500mm). Great pushing force, 2300N. Safety. Obstacle detection Electronic soft stop. One model for both left hand and right hand.

  • Power supply cable’s protected position. (Image)
  • Practical key unlocking system. (Image)
  • Values for orientation purposes. The shape of the leaf and the presence of wind may bring notable differences in the values of the chart. (Images)
  • The use of Swing Gate Motor electrolock is obligatory in unlocked models, and also in locked models, and also in locked models when the leaves are over 1.80m long.

Swing Gate Motor ELECTRICAL WIRING

A. Main power supply.

B. Flashing lamp.

C. Photocell.

D. Push button or key switch

E.Motor

F.Antenna

TECHNICAL DATA

CA43CA53
POWER SUPPLY230 / 50
POWER CONSUMED (W)200
ABSORBED CURRENT (A)0.8
CAPACITOR (UF)88
MAXIMUM THRUST (N)2300
SPINDLE SPEED (mm/s)16
MAX TRAVEL (mm)400500
OPENING TIME 90 DEGREE (s)2531
DUTY CYCLES 3 – 30%
LOCKYES
LIMIT SWITCHESNO
ENCODERNO
MAXIMUM OPENING ANGLE100 DEGREE 120 DEGREE
PROTECTION LEVELIP 44
OPERATING TEMPERATURE(DEGREE C)-30/+50
MOTOR WEIGHT (KG)6,56,8
PACKING DIMENSION (CM)88 X 24 X 2098 X 19 X 14
MAXIMUM LENGTH  OF THE LEAF (M)2,53
MAXIMUM WEIGHT OF THE LEAF (KG)400500

RECOMMENDED KITS:

1. 400mm piston road

  1. 2 motors CA43
  2. 1 Control panel VIVO-M201
  3. 1 Receiver IRRE2-250
  4. 2 Transmitters IRIS- IR02
  5. 1 Photocell FT06

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Swing Gate Motor and operator Calypso”

There are no reviews yet.

Vendor Information

  • Store Name: MRM TECHNOLOGY
  • Vendor: MRM TECHNOLOGY
  • 3.03 rating from 688 reviews
Request a Estimate
Enter Your Information below and we will get back to you with an estimate within few hours